1.2 Dictionary of DEIMOS Keywords

 

1.2.1 Legend

 

MemeName (Context) RW Sybase_Type F77_fmt C_fmt [Units]

The attributes displayed here if available are: the Meme name, context, access (read/write/both), datatype, FORTRAN format, C format, and the value's units and legitimate range (if any). A table may also have a FITS EXTNAME. This text is the Semantics.

1.2.2 Regular Memes

 

ACPOWER (DEIMOS2) r varchar(68) A (0.0 to 1.0)

AC power to the instrument. Place(s) where you can monitor this signal (ups line fail* I): At pin 15 on cable/J9 as shown on drawing el-3113-1d - corresponds to signal chan/16 on Galil controller 0. At pin 6 on cable/JV1 as shown on drawing el-3102-1w - corresponds to signal ()/() on Galil controller 0. Is an instance of failed_okay:

failed_okay (map.helpers) r char(1) L1 (0.0 to 1.0)

Generic map meme for a system status boolean state (FAILED/OKAY) keywords.

 

AIRSUPLY (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Compressed air supply alarm. Place(s) where you can monitor this signal (air pressure is OK* I): At pin 15 on cable/J3 as shown on drawing el-3036-1d - corresponds to signal chan/16 on Galil controller 1. Is an instance of failed_okay:

failed_okay (map.helpers) r char(1) L1 (0.0 to 1.0)

Generic map meme for a system status boolean state (FAILED/OKAY) keywords.

 

BARENFAN (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument (barrel) electronics cooling fans. The barrel electronics cooling monitor keyword BARENMON must be set to MANUAL to prevent the monitor from controlling the fan state. Place(s) where you can monitor this signal (fans on* (barrel) O): At pin 33 on cable/J1 as shown on drawing el-3034-1d - corresponds to signal chan/7 on Galil controller 1. At pin 16 on panel/1 as shown on drawing el-3004-1l - corresponds to signal chan/7 on Galil controller 1. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

BARENMON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument (barrel) electronics enclosure temperature control monitor. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

BARENTRG (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Instrument (barrel) electronics enclosure target temperature in raw A/D converter counts.

 

BARENVAL (DEIMOS2) rw real E13.6 [degC] (-50.0 to 50.0)

Instrument (barrel) electronics enclosure temperature in degrees celsius. Place(s) where you can monitor this signal (enclosure temperature (barrel) I): At pin 1 on conn/J5 as shown on drawing el-3020-1d - corresponds to signal analog/1 on Galil controller 1. At pin 18 on termbd/A as shown on drawing el-3026-1d - corresponds to signal analog/1 on Galil controller 1. Uses map Linear to convert or format BARENRAW:

BARENRAW (DEIMOS2) rw int I11 %d [12 bit adc value] (0.0 to 4095.0)

Instrument (barrel) electronics enclosure temperature in raw A/D converter counts.

 

BARGLFLO (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Coolant (glycol) flow status for the instrument (barrel) electronics cooling system. Place(s) where you can monitor this signal (not yet supported I): At pin -1 on none/null as shown on drawing el-0000-0a - corresponds to signal analog/-1 on Galil controller 1. Is an instance of failed_okay:

failed_okay (map.helpers) r char(1) L1 (0.0 to 1.0)

Generic map meme for a system status boolean state (FAILED/OKAY) keywords.

 

BARGLVAL (DEIMOS2) r real E13.6 [degC] (-50.0 to 50.0)

Coolant (glycol) temperature in degrees celsius for the instrument (barrel) electronics. Place(s) where you can monitor this signal (glycol temperature (barrel) I): At pin 2 on cable/J5 as shown on drawing el-3020-1d - corresponds to signal analog/2 on Galil controller 1. At pin 19 on termbd/A as shown on drawing el-3026-1d - corresponds to signal analog/2 on Galil controller 1. Uses map Linear to convert or format BARGLRAW:

BARGLRAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Coolant (glycol) temperature in raw A/D converter counts for the instrument (barrel) electronics.

 

BARXTVAL (DEIMOS2) r real E13.6 [degC] (-50.0 to 50.0)

External (dome) temperature in degrees celsius for the barrel electronics cooling system. Place(s) where you can monitor this signal (dome temperature (barrel) I): At pin 3 on conn/J5 as shown on drawing el-3020-1d - corresponds to signal analog/3 on Galil controller 1. At pin 20 on termbd/A as shown on drawing el-3026-1d - corresponds to signal analog/3 on Galil controller 1. Uses map Linear to convert or format BARXTRAW:

BARXTRAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

External (dome) temperature in raw A/D converter counts for the instrument (barrel) electronics cooling system.

 

CARENFAN (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Carriage electronics cooling fans. The carriage electronics cooling monitor keyword CARENMON must be set to MANUAL to prevent the monitor from controlling the fan state. Place(s) where you can monitor this signal (fans on* (barrel) O): At pin 43 on cable/J5 as shown on drawing el-3111-1d - corresponds to signal chan/2 on Galil controller 0. At pin 2 on termbd/TBVD as shown on drawing el-3107-1l - corresponds to signal chan/7 on Galil controller 1. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

CARENMON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Carriage electronics enclosure temperature control monitor. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

CARENTRG (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Carriage electronics enclosure target temperature in raw A/D converter counts.

 

CARENVAL (DEIMOS2) rw real E13.6 [degC] (-50.0 to 50.0)

Carriage electronics enclosure temperature in degrees celsius. Place(s) where you can monitor this signal (enclosure temperature (cradle) I): At pin 1 on conn/J5 as shown on drawing el-3030-1d - corresponds to signal analog/1 on Galil controller 0. At pin 18 on termbd/() as shown on drawing el-3031-1d - corresponds to signal analog/1 on Galil controller 0. Uses map Linear to convert or format CARENRAW:

CARENRAW (DEIMOS2) rw int I11 %d [12 bit adc value] (0.0 to 4095.0)

Carriage electronics enclosure temperature in raw A/D converter counts.

 

CARGLFLO (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Coolant (glycol) flow status for the carriage electronics cooling system. Place(s) where you can monitor this signal (coolflow flow is OK (cradle) I): At pin 17 on cable/J9 as shown on drawing el-3113-1d - corresponds to signal chan/15 on Galil controller 0. At pin 32 on panel/3 as shown on drawing el-3103-1l - corresponds to signal chan/15 on Galil controller 0. Is an instance of failed_okay:

failed_okay (map.helpers) r char(1) L1 (0.0 to 1.0)

Generic map meme for a system status boolean state (FAILED/OKAY) keywords.

 

CARGLVAL (DEIMOS2) r real E13.6 [degC] (-50.0 to 50.0)

Coolant (glycol) temperature in degrees celsius for the carriage electronics. Place(s) where you can monitor this signal (glycol temperature (cradle) I): At pin 2 on cable/J5 as shown on drawing el-3030-1d - corresponds to signal analog/2 on Galil controller 0. At pin 19 on termbd/() as shown on drawing el-3031-1d - corresponds to signal analog/2 on Galil controller 0. Uses map Linear to convert or format CARGLRAW:

CARGLRAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Coolant (glycol) temperature in raw A/D converter counts for the carriage electronics.

 

CARXTVAL (DEIMOS2) r real E13.6 [degC] (-50.0 to 50.0)

External (dome) temperature in degrees celsius for the carriage electronics cooling system. Place(s) where you can monitor this signal (dome temperature (at cradle) I): At pin 3 on conn/J5 as shown on drawing el-3030-1d - corresponds to signal analog/3 on Galil controller 0. At pin 20 on termbd/() as shown on drawing el-3031-1d - corresponds to signal analog/3 on Galil controller 0. Uses map Linear to convert or format CARXTRAW:

CARXTRAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

External (dome) temperature in raw A/D converter counts for the carriage electronics cooling system.

 

CTRL0CMD (DEIMOS2) w varchar(68) A %s

Carriage motor controller command. A command for the controller in Galil-1500 series controller command language.

 

CTRL0MOD (DEIMOS2) rw int I11 (-3.0 to 2.0)

Carriage motor controller control mode. Is an instance of ctrl_mod:

ctrl_mod (map.helpers) rw int I11 %d (-3.0 to 2.0)

Generic map meme for motor controller mode keywords. Valid values of ctrl_mod are:

• Warm : Warm start. Stops programs and stages, clears requests, restarts bekins and uhaul.
• Cold : Cold start. Executes a controller reset.
• Ready : Read-only state. Motor controller tasks are ready for manual control box commands or commands from user interface processes.
• Bekins failed : Read-only state. The bekins task on the controller failed.
• Uhaul failed : Read-only state. The uhaul task on the controller failed.
• Bekins & Uhaul failed : Read-only state. The bekins and uhaul tasks on the controller failed.

 

CTRL0RSP (DEIMOS2) r varchar(68) A %s

Carriage motor controller response to a motor controller command.

 

CTRL0VER (DEIMOS2) r varchar(68) A %s

Carriage motor controller software & configuration data version information.

 

CTRL1CMD (DEIMOS2) w varchar(68) A %s

Instrument motor controller #1 command. A command for the controller in Galil-1500 series controller command language.

 

CTRL1MOD (DEIMOS2) rw int I11 (0.0 to 2.0)

Instrument motor controller #1 control mode. Is an instance of ctrl_mod:

ctrl_mod (map.helpers) rw int I11 %d (-3.0 to 2.0)

Generic map meme for motor controller mode keywords. Valid values of ctrl_mod are:

• Warm : Warm start. Stops programs and stages, clears requests, restarts bekins and uhaul.
• Cold : Cold start. Executes a controller reset.
• Ready : Read-only state. Motor controller tasks are ready for manual control box commands or commands from user interface processes.
• Bekins failed : Read-only state. The bekins task on the controller failed.
• Uhaul failed : Read-only state. The uhaul task on the controller failed.
• Bekins & Uhaul failed : Read-only state. The bekins and uhaul tasks on the controller failed.

 

CTRL1RSP (DEIMOS2) r varchar(68) A %s

Instrument motor controller #1 response to a motor controller command.

 

CTRL1VER (DEIMOS2) r varchar(68) A %s

Instrument motor controller #1 software & configuration data version information.

 

CTRL2CMD (DEIMOS2) w varchar(68) A %s

Instrument motor controller #2 command. A command for the controller in Galil-1500 series controller command language.

 

CTRL2MOD (DEIMOS2) rw int I11 (-3.0 to 2.0)

Instrument motor controller #2 control mode. Is an instance of ctrl_mod:

ctrl_mod (map.helpers) rw int I11 %d (-3.0 to 2.0)

Generic map meme for motor controller mode keywords. Valid values of ctrl_mod are:

• Warm : Warm start. Stops programs and stages, clears requests, restarts bekins and uhaul.
• Cold : Cold start. Executes a controller reset.
• Ready : Read-only state. Motor controller tasks are ready for manual control box commands or commands from user interface processes.
• Bekins failed : Read-only state. The bekins task on the controller failed.
• Uhaul failed : Read-only state. The uhaul task on the controller failed.
• Bekins & Uhaul failed : Read-only state. The bekins and uhaul tasks on the controller failed.

 

CTRL2RSP (DEIMOS2) r varchar(68) A %s

Instrument motor controller response to a motor controller command.

 

CTRL2VER (DEIMOS2) r varchar(68) A %s

Instrument controller #2 software & configuration data version information.

 

DISP0CFG (DEIMOS2) rw varchar(68) A %s

Path to the carriage controller dispatcher's root configuration file.

 

DISP0DIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Carriage dispatcher diagnostics routine selection.

 

DISP0LOG (DEIMOS2) rw varchar(68) A %s

Path to the log file for the carriage motor controller's dispatcher.

 

DISP0MOD (DEIMOS2) rw int I11 (0.0 to 7.0)

Carriage controller dispatcher mode. Is an instance of disp_mod:

disp_mod (map.helpers) rw int I11 %d (0.0 to 7.0)

Generic map meme for dispatcher mode keywords. Valid values of disp_mod are:

• Exit : Exit dispatcher (shutdown dispatcher process)
• Ready : Normal operating state. Devices can be calibrated and set to target states.
• Keyword : Keyword validation mode. No I/O to any device. No internal changes to dispatcher state via keywords, except to the dispatcher mode. Return SUCCESS status message.
• Simulate : Simulate I/O. No device I/O occurs. A success message is returned after device I/O request is simulated.
• Diagnostic : Run diagnostics routines selected via the DISPxDIA keyword for the dispatcher.
• Reconfig : Reload the dispatcher configuration data from the configuration file.
• Configuration error : Read only state. Error in the configuration data in the configuration files.

 

DISP0MSG (DEIMOS2) rw varchar(68) A %s

Latest message regarding carriage dispatcher.

 

DISP0VER (DEIMOS2) r varchar(68) A %s

Carriage dispatcher software version information.

 

DISP0VRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Carriage controller dispatcher verbose log messages. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

DISP1CFG (DEIMOS2) rw varchar(68) A %s

Path to the instrument dispatcher' #1's root configuration file.

 

DISP1DIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Instrument controller #1's dispatcher diagnostics routine selection.

 

DISP1LOG (DEIMOS2) rw varchar(68) A %s

Path to the log file for instrument motor controller #1's dispatcher.

 

DISP1MOD (DEIMOS2) rw int I11 (0.0 to 7.0)

Instrument controller #1's controller dispatcher mode. Is an instance of disp_mod:

disp_mod (map.helpers) rw int I11 %d (0.0 to 7.0)

Generic map meme for dispatcher mode keywords. Valid values of disp_mod are:

• Exit : Exit dispatcher (shutdown dispatcher process)
• Ready : Normal operating state. Devices can be calibrated and set to target states.
• Keyword : Keyword validation mode. No I/O to any device. No internal changes to dispatcher state via keywords, except to the dispatcher mode. Return SUCCESS status message.
• Simulate : Simulate I/O. No device I/O occurs. A success message is returned after device I/O request is simulated.
• Diagnostic : Run diagnostics routines selected via the DISPxDIA keyword for the dispatcher.
• Reconfig : Reload the dispatcher configuration data from the configuration file.
• Configuration error : Read only state. Error in the configuration data in the configuration files.

 

DISP1MSG (DEIMOS2) rw varchar(68) A %s

Latest message regarding instrument controller #1's dispatcher.

 

DISP1VER (DEIMOS2) r varchar(68) A %s

Instrument controller #1's dispatcher software version information.

 

DISP1VRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument controller #1's dispatcher verbose log messages. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

DISP2CFG (DEIMOS2) rw varchar(68) A %s

Path to the root configuration file for instrument controller #2's dispatcher.

 

DISP2DIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Instrument controller #2's diagnostics routine selection.

 

DISP2LOG (DEIMOS2) rw varchar(68) A %s

Path to the log file for instrument controller #2's dispatcher.

 

DISP2MOD (DEIMOS2) rw int I11 (0.0 to 7.0)

Instrument controller #2's controller dispatcher mode. Is an instance of disp_mod:

disp_mod (map.helpers) rw int I11 %d (0.0 to 7.0)

Generic map meme for dispatcher mode keywords. Valid values of disp_mod are:

• Exit : Exit dispatcher (shutdown dispatcher process)
• Ready : Normal operating state. Devices can be calibrated and set to target states.
• Keyword : Keyword validation mode. No I/O to any device. No internal changes to dispatcher state via keywords, except to the dispatcher mode. Return SUCCESS status message.
• Simulate : Simulate I/O. No device I/O occurs. A success message is returned after device I/O request is simulated.
• Diagnostic : Run diagnostics routines selected via the DISPxDIA keyword for the dispatcher.
• Reconfig : Reload the dispatcher configuration data from the configuration file.
• Configuration error : Read only state. Error in the configuration data in the configuration files.

 

DISP2MSG (DEIMOS2) rw varchar(68) A %s

Latest message regarding instrument controller #2's dispatcher.

 

DISP2VER (DEIMOS2) r varchar(68) A %s

Instrument controller #2's dispatcher software version information.

 

DISP2VRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument controller #1's dispacther verbose log messages. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

DOORCOLL (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Collimator access hatch position. If the hatch is open the instrument rotator motor power is cut off (see ROTATPOW). Is an instance of closed_open:

closed_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for a door status boolean state (CLOSED/OPEN) keywords. Valid values of closed_open are:

• closed : Door or hatch is closed.
• open : Door or hatch is open.

 

DOORDWR1 (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Dewar #1 access hatch position. If the hatch is open the instrument rotator motor power is cut off (see ROTATPOW). Is an instance of closed_open:

closed_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for a door status boolean state (CLOSED/OPEN) keywords. Valid values of closed_open are:

• closed : Door or hatch is closed.
• open : Door or hatch is open.

 

DOORDWR2 (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Dewar #2 access hatch position. If the hatch is open the instrument rotator motor power is cut off (see ROTATPOW). Is an instance of closed_open:

closed_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for a door status boolean state (CLOSED/OPEN) keywords. Valid values of closed_open are:

• closed : Door or hatch is closed.
• open : Door or hatch is open.

 

DOORELEC (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the electronics enclosure hatches on the instrument. Shows TRUE if a hatch is open.

 

DOORFILT (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Filter access door position. If the door is open the instrument rotator motor power is cut off (see ROTATPOW). Is an instance of closed_open:

closed_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for a door status boolean state (CLOSED/OPEN) keywords. Valid values of closed_open are:

• closed : Door or hatch is closed.
• open : Door or hatch is open.

 

DOORGRAT (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Grating access door position. If the door is open the instrument rotator motor power is cut off (see ROTATPOW). Is an instance of closed_open:

closed_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for a door status boolean state (CLOSED/OPEN) keywords. Valid values of closed_open are:

• closed : Door or hatch is closed.
• open : Door or hatch is open.

 

DOORMAN (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Man access hatch position. If the hatch is open the instrument rotator motor power is cut off (see ROTATPOW). Is an instance of closed_open:

closed_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for a door status boolean state (CLOSED/OPEN) keywords. Valid values of closed_open are:

• closed : Door or hatch is closed.
• open : Door or hatch is open.

 

DOORMASK (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Slit mask access door position. If the door is open the instrument rotator motor power is cut off (see ROTATPOW). Is an instance of closed_open:

closed_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for a door status boolean state (CLOSED/OPEN) keywords. Valid values of closed_open are:

• closed : Door or hatch is closed.
• open : Door or hatch is open.

 

DOORS (deimos2) r char(1) L1 (0.0 to 1.0)

State of the doors and hatches on the instrument. Shows TRUE if a door or hatch is open. The ROTATPOW keyword shows the same status, since an open door will kill power to the instrument rotator.

 

DWFILCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar filter calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

DWFILDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Dewar filter wheel diagnostics test selection.

 

DWFILENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Dewar filter second encoder raw position.

 

DWFILERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Dewar filter command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

DWFILFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Dewar filter fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

DWFILFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar filter light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

DWFILHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Dewar filter halt software switch.

 

DWFILLIM (DEIMOS2) r int I11 (0.0 to 63.0)

Dewar filter limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

DWFILMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Dewar filter control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

DWFILMSG (DEIMOS2) r varchar(68) A %s

Dewar filter message.

 

DWFILNAM (DEIMOS2) rw varchar(68) A

Dewar filter ordinal position name. Uses map TableLook to convert or format DWFILORD:

• 0 Home
• 1 Nominal

DWFILORD (DEIMOS2) rw int I11 (0.0 to 8.0)

Dewar filter ordinal position. Uses map TableLook to convert or format DWFILRAW:

• 0 0
• 5000 1

DWFILRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar filter raw position.

 

DWFILSTA (DEIMOS2) r int I11 (0.0 to 6.0)

Dewar filter status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

DWFILTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar filter raw position target.

 

DWFILVAL (DEIMOS2) rw real E13.6 [deg] (0.0 to 360.0)

Dewar filter wheel position in degrees. Uses map Linear to convert or format DWFILRAW:

DWFILRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar filter raw position.

 

DWFILVEL (DEIMOS2) rw real E13.6 %E [deg/s] (0.0 to 30.0)

Dewar filter velocity.

 

DWFILVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar filter verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

DWFOCCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar focus calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

DWFOCDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Dewar focus diagnostics test selection.

 

DWFOCENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Dewar focus second encoder raw position.

 

DWFOCERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Dewar focus command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

DWFOCFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Dewar focus fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

DWFOCFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar focus light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

DWFOCHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Dewar focus halt software switch.

 

DWFOCLIM (DEIMOS2) r int I11 (0.0 to 63.0)

Dewar focus limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

DWFOCMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Dewar focus control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

DWFOCMSG (DEIMOS2) r varchar(68) A %s

Dewar focus message.

 

DWFOCNAM (DEIMOS2) rw varchar(68) A

Dewar focus ordinal position name. Uses map TableLook to convert or format DWFOCORD:

• 0 Home
• 1 Nominal

DWFOCORD (DEIMOS2) rw int I11 (0.0 to 5.0)

Dewar focus ordinal position. Uses map TableLook to convert or format DWFOCRAW:

• 0 0
• 5000 1

DWFOCRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar focus raw position.

 

DWFOCSTA (DEIMOS2) r int I11 (0.0 to 6.0)

Dewar focus status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

DWFOCTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar focus raw position target.

 

DWFOCVAL (DEIMOS2) rw real E13.6 [mm] (0.0 to 10.0)

Dewar focus position in millimeters. Uses map Linear to convert or format DWFOCRAW:

DWFOCRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar focus raw position.

 

DWFOCVEL (DEIMOS2) rw real E13.6 %E [mm/s] (0.0 to 0.25)

Dewar focus velocity.

 

DWFOCVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar focus verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

DWXL8CAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar translation stage calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

DWXL8DIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Dewar translation diagnostics test selection.

 

DWXL8ENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Dewar translation second encoder raw position.

 

DWXL8ERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Dewar translation command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

DWXL8FIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Dewar translation fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

DWXL8FOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar translation light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

DWXL8HLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Dewar translation halt software switch.

 

DWXL8LIM (DEIMOS2) r int I11 (0.0 to 63.0)

Dewar translation limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

DWXL8MOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Dewar translation control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

DWXL8MSG (DEIMOS2) r varchar(68) A %s

Dewar translation message.

 

DWXL8NAM (DEIMOS2) rw varchar(68) A

Dewar translation ordinal position name. Uses map TableLook to convert or format DWXL8ORD:

DWXL8ORD (DEIMOS2) rw int I11 (0.0 to 5.0)

Dewar transaltion ordinal position. Uses map TableLook to convert or format DWXL8RAW:

DWXL8RAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar translation raw position.

 

DWXL8STA (DEIMOS2) r int I11 (0.0 to 6.0)

Dewar translation status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

DWXL8TRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar translation raw position target.

 

DWXL8VAL (DEIMOS2) rw real E13.6 [mm] (0.0 to 10.0)

Dewar translation position in millimeters. Uses map Linear to convert or format DWXL8RAW:

DWXL8RAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Dewar translation raw position.

 

DWXL8VEL (DEIMOS2) rw real E13.6 %E [mm/s] (0.0 to 0.25)

Dewar transaltion velocity.

 

DWXL8VRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar translation verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

FIBARCFG (deimos2) rw varchar(68) A %s

Filter bar code reader configuration.

 

FIBARCMD (deimos2) w varchar(68) A %s

Filter bar code reader command. A command for the bar code reader in its native command language. The response to the command is available via the FIBARRSP keyword.

 

FIBARGET (deimos2) r varchar(68) A %s

Read filter bar code. Returns the last bar code read by the scanner. Use the FIBARSCN keyword to read a bar code.

 

FIBARRSP (deimos2) r varchar(68) A %s

Filter bar code reader response to a bar code reader command sent via the FIBARCMD keyword.

 

FIBARSCN (deimos2) w varchar(68) A (0.0 to 1.0)

Scan filter bar code reader. An ON value pulses the laser for the bar code reader. Use the FIBARGET keyword to get the last bar code scanned. An OFF value turns off the laser, if it is ON. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

G1TLTCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #1 tilt calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

G1TLTDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Grating #1 tilt diagnostics test selection.

 

G1TLTENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Grating #1 tilt second encoder raw position.

 

G1TLTERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Gratiing #1 tilt command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

G1TLTFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Grating #1 tilt fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

G1TLTFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #1 tilt light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

G1TLTHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Grating #1 tilt halt software switch.

 

G1TLTLIM (DEIMOS2) r int I11 (0.0 to 63.0)

Grating #1 tilt limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

G1TLTMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Grating #1 tilt control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

G1TLTMSG (DEIMOS2) r varchar(68) A %s

Grating #1 tilt message.

 

G1TLTNAM (DEIMOS2) rw varchar(68) A

Grating #1 tilt ordinal position name. Uses map TableLook to convert or format G1TLTORD:

• 0 Home
• 1 Nominal

G1TLTORD (DEIMOS2) rw int I11 (0.0 to 2.0)

Grating #1 tilt ordinal position. Uses map TableLook to convert or format G1TLTRAW:

• 0 0
• 5000 1

G1TLTRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #1 tilt raw position.

 

G1TLTSTA (DEIMOS2) r int I11 (0.0 to 6.0)

Grating #1 tilt status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

G1TLTTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #1 tilt raw position target.

 

G1TLTVAL (DEIMOS2) rw real E13.6 [deg] (0.0 to 43.0)

Grating #1 tilt position in degrees. Uses map Linear to convert or format G1TLTRAW:

G1TLTRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #1 tilt raw position.

 

G1TLTVEL (DEIMOS2) rw real E13.6 %E [deg/s] (0.0 to 0.25)

Grating #1 tilt velocity.

 

G1TLTVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #1 tilt verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

G3TLTCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #2 tilt calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

G3TLTDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Grating #2 tilt diagnostics test selection.

 

G3TLTENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Grating #3 tilt second encoder raw position.

 

G3TLTERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Gratiing #2 tilt command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

G3TLTFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Grating #2 tilt fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

G3TLTFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #2 tilt light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

G3TLTHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Grating #2 tilt halt software switch.

 

G3TLTLIM (DEIMOS2) r int I11 (0.0 to 63.0)

Grating #2 tilt limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

G3TLTMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Grating #2 tilt control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

G3TLTMSG (DEIMOS2) r varchar(68) A %s

Grating #2 tilt message.

 

G3TLTNAM (DEIMOS2) rw varchar(68) A

Grating #2 tilt ordinal position name. Uses map TableLook to convert or format G3TLTORD:

• 0 Home
• 1 Nominal

G3TLTORD (DEIMOS2) rw int I11 (0.0 to 2.0)

Grating #2 tilt ordinal position. Uses map TableLook to convert or format G3TLTRAW:

• 0 0
• 5000 1

G3TLTRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #2 tilt raw position.

 

G3TLTSTA (DEIMOS2) r int I11 (0.0 to 6.0)

Grating #2 tilt status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

G3TLTTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #2 tilt raw position target.

 

G3TLTVAL (DEIMOS2) rw real E13.6 [deg] (0.0 to 43.0)

Grating #2 tilt position in degrees. Uses map Linear to convert or format G3TLTRAW:

G3TLTRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #2 tilt raw position.

 

G3TLTVEL (DEIMOS2) rw real E13.6 %E [deg/s] (0.0 to 0.25)

Grating #2 tilt velocity.

 

G3TLTVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #2 tilt verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

G4TLTCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #4 tilt calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

G4TLTDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Grating #4 tilt diagnostics test selection.

 

G4TLTENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Grating #4 tilt second encoder raw position.

 

G4TLTERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Gratiing #4 tilt command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

G4TLTFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Grating #4 tilt fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

G4TLTFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #4 tilt light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

G4TLTHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Grating #4 tilt halt software switch.

 

G4TLTLIM (DEIMOS2) r int I11 (0.0 to 63.0)

Grating #4 tilt limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

G4TLTMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Grating #4 tilt control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

G4TLTMSG (DEIMOS2) r varchar(68) A %s

Grating #4 tilt message.

 

G4TLTNAM (DEIMOS2) rw varchar(68) A

Grating #4 tilt ordinal position name. Uses map TableLook to convert or format G4TLTORD:

• 0 Home
• 1 Nominal

G4TLTORD (DEIMOS2) rw int I11 (0.0 to 2.0)

Grating #4 tilt ordinal position. Uses map TableLook to convert or format G4TLTRAW:

• 0 0
• 5000 1

G4TLTRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #4 tilt raw position.

 

G4TLTSTA (DEIMOS2) r int I11 (0.0 to 6.0)

Grating #4 tilt status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

G4TLTTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #4 tilt raw position target.

 

G4TLTVAL (DEIMOS2) rw real E13.6 [deg] (0.0 to 43.0)

Grating #4 tilt position in degrees. Uses map Linear to convert or format G4TLTRAW:

G4TLTRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Grating #4 tilt raw position.

 

G4TLTVEL (DEIMOS2) rw real E13.6 %E [deg/s] (0.0 to 0.25)

Grating #4 tilt velocity.

 

G4TLTVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating #4 tilt verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

GRBARCFG (deimos2) rw varchar(68) A %s

Grating bar code reader configuration.

 

GRBARCMD (deimos2) w varchar(68) A %s

Grating bar code reader command. A command for the bar code reader in its native command language. The response to the command is available via the GRBARRSP keyword.

 

GRBARGET (deimos2) r varchar(68) A %s

Read grating bar code. Returns the last bar code read by the scanner. Use the FIBARSCN keyword to read a bar code.

 

GRBARRSP (deimos2) r varchar(68) A %s

Grating bar code reader response to a bar code reader command sent via the GRBARCMD keyword.

 

GRBARSCN (deimos2) w varchar(68) A (0.0 to 1.0)

Scan grating bar code reader. An ON value pulses the laser for the bar code reader. Use the GRBARGET keyword to get the last bar code scanned. An OFF value turns off the laser, if it is ON. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

GRCLAMP1 (deimos2) r varchar(68) A (0.0 to 1.0)

State of grating slide clamp #1. Is an instance of unlock_lock:

unlock_lock (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (UNLOCKED/LOCKED) keywords. Valid values of unlock_lock are:

• unlocked : Device unlocked or clamp released.
• locked : Device unlock or clamp set.

 

GRCLAMP2 (deimos2) r varchar(68) A (0.0 to 1.0)

State of grating slide clamp #2. Is an instance of unlock_lock:

unlock_lock (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (UNLOCKED/LOCKED) keywords. Valid values of unlock_lock are:

• unlocked : Device unlocked or clamp released.
• locked : Device unlock or clamp set.

 

GRCLAMP3 (deimos2) r varchar(68) A (0.0 to 1.0)

State of grating slide clamp #3. Is an instance of unlock_lock:

unlock_lock (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (UNLOCKED/LOCKED) keywords. Valid values of unlock_lock are:

• unlocked : Device unlocked or clamp released.
• locked : Device unlock or clamp set.

 

GRCLAMP4 (deimos2) r varchar(68) A (0.0 to 1.0)

State of grating slide clamp #4. Is an instance of unlock_lock:

unlock_lock (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (UNLOCKED/LOCKED) keywords. Valid values of unlock_lock are:

• unlocked : Device unlocked or clamp released.
• locked : Device unlock or clamp set.

 

GRCLAMP5 (deimos2) r varchar(68) A (0.0 to 1.0)

State of grating slide clamp #5. Is an instance of unlock_lock:

unlock_lock (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (UNLOCKED/LOCKED) keywords. Valid values of unlock_lock are:

• unlocked : Device unlocked or clamp released.
• locked : Device unlock or clamp set.

 

GRCLAMPS (deimos2) rw varchar(68) A (0.0 to 5.0)

State of all grating slide clamps. Is an instance of clamp_pos:

clamp_pos (map.helpers) rw int I11 %d (0.0 to 5.0)

Generic map meme for lock or clamp state keywords. Valid values of clamp_pos are:

• unlocked : Lock or clamp unlocked.
• locked : Lock or clamp locked.
• unlocking : Lock or clamp unlocking.
• locking : Lock or clamp locking.
• stage stuck : Neither locked or unlocked signal detected. Mechanical or electrical problem.
• signal failure : Both locked and unlocked signal detected. Electrical problem.

 

GRSELCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating selection calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

GRSELDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Grating selection diagnostics test selection.

 

GRSELENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Grating selection second encoder raw position.

 

GRSELERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Grating selection command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

GRSELFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Grating selection fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

GRSELFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating selection light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

GRSELHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Grating selection halt software switch.

 

GRSELLIM (DEIMOS2) r int I11 (0.0 to 63.0)

Grating selection limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

GRSELMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Grating selection control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

GRSELMSG (DEIMOS2) r varchar(68) A %s

Grating selection message.

 

GRSELNAM (DEIMOS2) rw varchar(68) A

Grating selection ordinal position name. Uses map TableLook to convert or format GRSELORD:

• 0 Home
• 1 Nominal

GRSELORD (DEIMOS2) rw int I11 (0.0 to 3.0)

Grating selection ordinal position. Uses map TableLook to convert or format GRSELRAW:

• 0 0
• 5000 1

GRSELRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Grating selection raw position.

 

GRSELSTA (DEIMOS2) r int I11 (0.0 to 6.0)

Grating selection status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

GRSELTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Grating selection raw position target.

 

GRSELVAL (DEIMOS2) rw real E13.6 [mm] (0.0 to 10.0)

Grating selection position in millimeters. Uses map Linear to convert or format GRSELRAW:

GRSELRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Grating selection raw position.

 

GRSELVEL (DEIMOS2) rw real E13.6 %E [mm/s] (0.0 to 0.25)

Grating selection velocity.

 

GRSELVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Grating selection verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

HATCHPOS (deimos2) rw varchar(68) A (0.0 to 5.0)

Instrument light path hatch position. Is an instance of cover_pos:

cover_pos (map.helpers) rw int I11 %d (0.0 to 5.0)

Generic map meme for cover state keywords. Valid values of cover_pos are:

• closed : Cover closed.
• open : Cover open.
• closing : Cover closing.
• opening : Cover opening.
• stage stuck : Neither closed or open signal detected. Mechanical or electrical problem.
• signal failure : Both closed and open signal detected. Electrical problem.

 

INSTCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Calibrate or reset calibration state of all devices that are part of the instrument. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

INSTHALT (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Halt all device motion for the entire instrument. Stops all moving stages as quickly as possible. Prevents devices from changing state when set true. Terminates diagnostics. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

INSTMODE (DEIMOS2) rw int I11 (0.0 to 4.0)

Instrument mode. (up, down, starting up, shutting down, error).

 

INSTMSG (DEIMOS2) rw varchar(68) A %s

Message keyword for general purpose, instrument-wide information.

 

IONDVPMP (deimos2) r varchar(68) A (0.0 to 1.0)

Ion pump status for the detector vessel ion pump. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

IONN2PMP (deimos2) r varchar(68) A (0.0 to 1.0)

Ion pump status for the liquid nitrogen can ion pump. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

LAMPAR1 (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Argon comparison lamp #1 state. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

LAMPHE1 (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Helium comparison lamp #1 state. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

LAMPHG1 (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Mercury comparison lamp #1 state. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

LAMPNE1 (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Neon comparison lamp #1 state. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

LAMPQTZ1 (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Quartz comparison lamp #1 state. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

LAMPS (deimos2) rw char(1) L1 (0.0 to 1.0)

State of the calibration lamps. Shows TRUE if a lamp is on and can be used to turn all lamps off.

 

LAMPXT1 (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

External (dome) comparison lamp #1 state. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

LAMPXT2 (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

External (dome) comparison lamp #2 state. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN00CON (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the auto/manual control switch on the manual control box for motor controller #0 (carriage motor controller). Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

MAN00FWD (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the forward button on the manual control box for motor controller #0 (carriage motor controller). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN00MOD (DEIMOS2) r int I11 (0.0 to 7.0)

State of the manual control mode switch on the manual control box for motor controller #0 (carriage motor controller). Is an instance of man_mod:

man_mod (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for manual control mode keywords. Valid values of man_mod are:

• Low speed jog : FWD and REV manual control buttons cause selected stage to jog forward or reverse at slow jog speed.
• High speed jog : FWD and REV manual control buttons cause selected stage to jog forward or reverse at high jog speed.
• Discrete position : FWD and REV manual control buttons move selected stage one defined position forward or reverse.
• Home : FWD and REV manual control buttons home selected stage.
• Spare :
• Spare :
• Spare :
• Calibration lamps : FWD and REV manual control buttons cause selected lamp to turn on or off.

 

MAN00REV (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the reverse button on the manual control box for motor controller #0 (carriage motor controller). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN00SEL (DEIMOS2) r int I11 (0.0 to 7.0)

State of the stage select switch on the manual control box for motor controller #0 (carriage motor controller).

 

MAN00STP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the stop button on the manual control box for motor controller #0 (carriage motor controller). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN01CON (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the auto/manual control switch on the manual control box for motor controller #1 (instrument motor controller #1). Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

MAN01FWD (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the forward button on the manual control box for motor controller #1 (instrument motor controller #1). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN01HAT (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the hatch control button on the manual control box for motor controller #1 (instrument motor controller #1). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN01MOD (DEIMOS2) r int I11 (0.0 to 7.0)

State of the manual control mode switch on the manual control box for motor controller #1 (instrument motor controller #1). Is an instance of man_mod:

man_mod (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for manual control mode keywords. Valid values of man_mod are:

• Low speed jog : FWD and REV manual control buttons cause selected stage to jog forward or reverse at slow jog speed.
• High speed jog : FWD and REV manual control buttons cause selected stage to jog forward or reverse at high jog speed.
• Discrete position : FWD and REV manual control buttons move selected stage one defined position forward or reverse.
• Home : FWD and REV manual control buttons home selected stage.
• Spare :
• Spare :
• Spare :
• Calibration lamps : FWD and REV manual control buttons cause selected lamp to turn on or off.

 

MAN01MSK (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the slit mask insertion button on the manual control box for motor controller #1 (instrument motor controller #1). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN01REV (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the reverse button on the manual control box for motor controller #1 (instrument motor controller #1). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN01SEL (DEIMOS2) r int I11 (0.0 to 7.0)

State of the stage select switch on the manual control box for motor controller #1 (instrument motor controller #1).

 

MAN01STP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the stop button on the manual control box for motor controller #1 (instrument motor controller #1). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN02CON (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the auto/manual control switch on the manual control box for motor controller #2 (instrument motor controller #2). Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

MAN02FWD (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the forward button on the manual control box for motor controller #2 (instrument motor controller #2). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN02GRC (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the grating clamp button on the manual control box for motor controller #2 (instrument motor controller #2). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN02MOD (DEIMOS2) r int I11 (0.0 to 7.0)

State of the manual control mode switch on the manual control box for motor controller #2 (instrument motor controller #2). Is an instance of man_mod:

man_mod (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for manual control mode keywords. Valid values of man_mod are:

• Low speed jog : FWD and REV manual control buttons cause selected stage to jog forward or reverse at slow jog speed.
• High speed jog : FWD and REV manual control buttons cause selected stage to jog forward or reverse at high jog speed.
• Discrete position : FWD and REV manual control buttons move selected stage one defined position forward or reverse.
• Home : FWD and REV manual control buttons home selected stage.
• Spare :
• Spare :
• Spare :
• Calibration lamps : FWD and REV manual control buttons cause selected lamp to turn on or off.

 

MAN02REV (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the reverse button on the manual control box for motor controller #2 (instrument motor controller #2). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

MAN02SEL (DEIMOS2) r int I11 (0.0 to 7.0)

State of the stage select switch on the manual control box for motor controller #2 (instrument motor controller #2).

 

MAN02STP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

State of the stop button on the manual control box for motor controller #2 (instrument motor controller #2). Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

N2DWRFIL (DEIMOS2) rw char(1) L1 (0.0 to 1.0)

Dewar nitrogen fill valve state.

 

N2DWRLVL (DEIMOS2) r real E13.6 [percent] (0.0 to 100.0)

Dewar nitrogen level as a percentage of full. Uses map Linear to convert or format N2DWRRAW:

N2DWRRAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Dewar nitrogen level in raw A/D converter counts.

 

N2FILMOD (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Dewar nitrogen fill control mode. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

N2RESLVL (DEIMOS2) r real E13.6 [percent] (0.0 to 100.0)

50 liter reservoir nitrogen level as a percentage of full. Uses map Linear to convert or format N2RESRAW:

N2RESRAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

50 liter reservoir nitrogen level in raw A/D converter counts.

 

OBSINPRG (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Observation in progress signal. Produces a visual or auditory signal on nasmyth platform. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

POWER (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Master power shutdown switch. Shuts off power to all DEIMOS electronics. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

POWH0MON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

High voltage (+-15 volts) logic power supply voltage monitor for the carriage. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

POWH0VAL (DEIMOS2) r real E13.6 [V] (-5.0 to 20.0)

External logic high power (+-15 volt) supply voltage for the carriage in volts. Uses map Linear to convert or format POWH0RAW:

POWH0RAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

High voltage (+-15 volts) logic power supply voltage for the carriage in raw A/D converter counts.

 

POWH2MON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

High voltage (+-15 volts) logic power supply voltage monitor for the instrument. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

POWH2VAL (DEIMOS2) r real E13.6 [V] (-5.0 to 20.0)

High voltage (+-15 volts) logic power supply voltage for the instrument in volts. Uses map Linear to convert or format POWH2RAW:

POWH2RAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

High voltage (+-15 volts) logic power supply voltage for the instrument in raw A/D converter counts.

 

POWL0MON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Low voltage (+5 volts) logic power supply voltage monitor for the carriage. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

POWL0VAL (DEIMOS2) r real E13.6 [V] (-5.0 to 10.0)

Low voltage (+5 volts) logic power supply voltage for the carriage in volts. Uses map Linear to convert or format POWL0RAW:

POWL0RAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Low voltage (+5 volts) logic power supply voltage for the carriage in raw A/D converter counts.

 

POWL2MON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Low voltage (+5 volts) logic power supply voltage monitor for the instrument. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

POWL2VAL (DEIMOS2) r real E13.6 [V] (-5.0 to 10.0)

Low voltage (+5 volts) logic power supply voltage for the instrument in volts. Uses map Linear to convert or format POWL2RAW:

POWL2RAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Low voltage (+5 volts) logic power supply voltage for the instrument in raw A/D converter counts.

 

POWM0MON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Carriage motor power supply (POWM0) monitor. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

POWM0VAL (DEIMOS2) r real E13.6 [V] (0.0 to 50.0)

Carriage motor power supply (motor power supply #0) voltage. Uses map Linear to convert or format POWM0RAW:

POWM0RAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Carriage motor power supply (motor power supply #0) voltage in ADC counts.

 

POWM1MON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument motor power supply #1 (POWM1) monitor. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

POWM1VAL (DEIMOS2) r real E13.6 [V] (0.0 to 50.0)

Instrument motor power supply #1 voltage. Uses map Linear to convert or format POWM1RAW:

POWM1RAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Instrument motor power supply #1 voltage in ADC counts.

 

POWM2MON (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument motor power supply #2 (POWM2) monitor. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

POWM2VAL (DEIMOS2) r real E13.6 [V] (0.0 to 50.0)

Instrument motor power supply #2 voltage. Uses map Linear to convert or format POWM2RAW:

POWM2RAW (DEIMOS2) r int I11 %d [12 bit adc value] (0.0 to 4095.0)

Instrument motor power supply #2 voltage in ADC counts.

 

ROTATCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument rotator calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

ROTATDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Instrument rotator diagnostics test selection.

 

ROTATENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Instrument rotator second encoder raw position.

 

ROTATERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Instrument rotator command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

ROTATFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Instrument rotator fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

ROTATFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument rotator light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

ROTATHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Instrument rotator halt software switch.

 

ROTATLIM (DEIMOS2) r int I11 (0.0 to 63.0)

Instrument rotator limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

ROTATMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Instrument rotator control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

ROTATMSG (DEIMOS2) r varchar(68) A %s

Instrument rotator message.

 

ROTATNAM (DEIMOS2) rw varchar(68) A

Instrument rotator ordinal position name. Uses map TableLook to convert or format ROTATORD:

• 0 Home
• 1 Nominal

ROTATORD (DEIMOS2) rw int I11 (0.0 to 2.0)

Instrument rotator ordinal position. Uses map TableLook to convert or format ROTATRAW:

• 0 0
• 5000 1

ROTATRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Instrument rotator raw position.

 

ROTATPOW (deimos2) r char(1) L1 %s (0.0 to 1.0)

Instrument rotator motor power. Tripped by an open door signal. See also DOORS, DOORDWR1, DOORDWR2, DOORMAN, DOORCOLL, DOORGRAT, DOORFILT, DOORMASK, DOORMEL1, DOORCEL1.

 

ROTATSTA (DEIMOS2) r int I11 (0.0 to 6.0)

Instrument rotator status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

ROTATTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Instrument rotator raw position target.

 

ROTATVAL (DEIMOS2) rw real E13.6 [deg] (0.0 to 10.0)

Instrument rotator position in degrees. Uses map Linear to convert or format ROTATRAW:

ROTATRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Instrument rotator raw position.

 

ROTATVEL (DEIMOS2) rw real E13.6 %E [deg/s] (0.0 to 0.25)

Instrument rotator velocity.

 

ROTATVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Instrument rotator verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

ROTCLAMP (deimos2) r varchar(68) A (0.0 to 1.0)

State of the instrument rotation band clamp. Is an instance of unlock_lock:

unlock_lock (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (UNLOCKED/LOCKED) keywords. Valid values of unlock_lock are:

• unlocked : Device unlocked or clamp released.
• locked : Device unlock or clamp set.

 

SLBARCFG (deimos2) rw varchar(68) A %s

Slit mask bar code reader configuration.

 

SLBARCMD (deimos2) w varchar(68) A %s

Slit mask bar code reader command. A command for the bar code reader in its native command language. The response to the command is available via the SLBARRSP keyword.

 

SLBARGET (deimos2) r varchar(68) A %s

Read slit mask bar code. Returns the last bar code read by the scanner. Use the FIBARSCN keyword to read a bar code.

 

SLBARRSP (deimos2) r varchar(68) A %s

Slit mask bar code reader response to a bar code reader command sent via the SLBARCMD keyword.

 

SLBARSCN (deimos2) w varchar(68) A (0.0 to 1.0)

Scan slit mask bar code reader. An ON value pulses the laser for the bar code reader. Use the SLBARGET keyword to get the last bar code scanned. An OFF value turns off the laser, if it is ON. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

SLCASCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Slit mask cassette calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

SLCASDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

Slit mask cassette diagnostics test selection.

 

SLCASENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

Slit mask cassette second encoder raw position.

 

SLCASERR (DEIMOS2) r int I11 (-1.0 to 0.0)

Slit mask cassette command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

SLCASFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Slit mask cassette fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

SLCASFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Slit mask cassette light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

SLCASHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Slit mask cassette halt software switch.

 

SLCASLIM (DEIMOS2) r int I11 (0.0 to 63.0)

Slit mask cassette limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

SLCASMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

Slit mask cassette control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

SLCASMSG (DEIMOS2) r varchar(68) A %s

Slit mask cassette message.

 

SLCASNAM (DEIMOS2) rw varchar(68) A

Slit mask cassette ordinal position name. Uses map TableLook to convert or format SLCASORD:

• 0 Home
• 1 Nominal

SLCASORD (DEIMOS2) rw int I11 (0.0 to 12.0)

Slit mask cassette ordinal position. Uses map TableLook to convert or format SLCASRAW:

• 0 0
• 5000 1

SLCASRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Slit mask cassette raw position.

 

SLCASSTA (DEIMOS2) r int I11 (0.0 to 6.0)

Slit mask cassette status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

SLCASTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Slit mask cassette raw position target.

 

SLCASVAL (DEIMOS2) rw real E13.6 [mm] (0.0 to 10.0)

Slit mask cassette position in millimeters. Uses map Linear to convert or format SLCASRAW:

SLCASRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Slit mask cassette raw position.

 

SLCASVEL (DEIMOS2) rw real E13.6 %E [mm/s] (0.0 to 0.25)

Slit mask cassette velocity.

 

SLCASVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Slit mask cassette verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

SLMSKPOS (deimos2) rw varchar(68) A (0.0 to 5.0)

Slit mask insertion stage position. Is an instance of insert_pos:

insert_pos (map.helpers) rw int I11 %d (0.0 to 5.0)

Generic map meme for insertion state keywords. Valid values of insert_pos are:

• in : IN position of insertion system.
• out : OUT position of insertion system.
• moving out : Moving to OUT position of insertion system.
• moving in : Moving to IN position of insertion system.
• stage stuck : Neither OUT or IN signal detected. Mechanical or electrical problem.
• signal failure : Both OUT and IN signal detected. Electrical problem.

 

SYSDIS (DEIMOS2) r varchar(68) A (0.0 to 1.0)

System disable switch status. Is an instance of false_true:

• 0 System enabled
• 1 System disabled

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

TMIRRCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

Tent mirror translation stage calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

TMIRRHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

Tent mirror translation halt software switch.

 

TMIRRMSG (DEIMOS2) r varchar(68) A %s

Tent mirror translation message.

 

TMIRRNAM (DEIMOS2) rw varchar(68) A

Tent mirror translation ordinal position name. Uses map TableLook to convert or format TMIRRORD:

TMIRRORD (DEIMOS2) rw int I11 (0.0 to 5.0)

Tent mirror transaltion ordinal position. Uses map TableLook to convert or format TMIRRRAW:

TMIRRRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Tent mirror translation raw position.

 

TMIRRTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

Tent mirror translation raw position target.

 

TMIRRVAL (DEIMOS2) rw real E13.6 [mm] (0.0 to 10.0)

Tent mirror translation position in millimeters. Uses map Linear to convert or format TMIRRRAW:

TMIRRRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

Tent mirror translation raw position.

 

TVAPECAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider aperture calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

TVAPEDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

TV autoguider aperture diagnostics test selection.

 

TVAPEENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

TV autoguider aperture second encoder raw position.

 

TVAPEERR (DEIMOS2) r int I11 (-1.0 to 0.0)

TV autoguider aperture command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

TVAPEFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

TV autoguider aperture fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

TVAPEFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider aperture light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

TVAPEHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

TV autoguider aperture halt software switch.

 

TVAPELIM (DEIMOS2) r int I11 (0.0 to 63.0)

TV autoguider aperture limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

TVAPEMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

TV autoguider aperture control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

TVAPEMSG (DEIMOS2) r varchar(68) A %s

TV autoguider aperture message.

 

TVAPENAM (DEIMOS2) rw varchar(68) A

TV autoguider aperture ordinal position name. Uses map TableLook to convert or format TVAPEORD:

• 0 Home
• 1 Nominal

TVAPEORD (DEIMOS2) rw int I11 (0.0 to 8.0)

TV autoguider aperture ordinal position. Uses map TableLook to convert or format TVAPERAW:

• 0 0
• 5000 1

TVAPERAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider aperture raw position.

 

TVAPESTA (DEIMOS2) r int I11 (0.0 to 6.0)

TV autoguider aperture status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

TVAPETRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider aperture raw position target.

 

TVAPEVAL (DEIMOS2) rw real E13.6 [mm] (0.0 to 10.0)

TV autoguider aperture position in millimeters. Uses map Linear to convert or format TVAPERAW:

TVAPERAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider aperture raw position.

 

TVAPEVEL (DEIMOS2) rw real E13.6 %E [mm/s] (0.0 to 0.25)

TV autoguider aperture velocity.

 

TVAPEVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider aperture verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

TVFILDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

TV autoguider filter diagnostics test selection.

 

TVFILENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

TV autoguider filter second encoder raw position.

 

TVFILERR (DEIMOS2) r int I11 (-1.0 to 0.0)

TV autoguider filter command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

TVFILFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

TV autoguider filter fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

TVFILFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider filter light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

TVFILHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

TV autoguider filter halt software switch.

 

TVFILLIM (DEIMOS2) r int I11 (0.0 to 63.0)

TV autoguider filter limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

TVFILMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

TV autoguider filter control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

TVFILMSG (DEIMOS2) r varchar(68) A %s

TV autoguider filter message.

 

TVFILNAM (DEIMOS2) rw varchar(68) A

TV autoguider filter ordinal position name. Uses map TableLook to convert or format TVFILORD:

• 0 Home
• 1 Nominal

TVFILORD (DEIMOS2) rw int I11 (0.0 to 6.0)

TV autoguider filter ordinal position. Uses map TableLook to convert or format TVFILRAW:

• 0 0
• 5000 1

TVFILRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider filter raw position.

 

TVFILSTA (DEIMOS2) r int I11 (0.0 to 6.0)

TV autoguider filter status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

TVFILTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider filter raw position target.

 

TVFILVAL (DEIMOS2) rw real E13.6 [deg] (0.0 to 10.0)

TV autoguider filter position in degrees. Uses map Linear to convert or format TVFILRAW:

TVFILRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider filter raw position.

 

TVFILVEL (DEIMOS2) rw real E13.6 %E [deg/s] (0.0 to 0.25)

TV autoguider filter velocity.

 

TVFILVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider filter verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

TVFOCCAL (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider focus calibration state. Is an instance of reset_homed:

reset_homed (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for stage calibration boolean state (RESET/HOMED) keywords. Valid values of reset_homed are:

• reset : Calibrate the stage during the next attempt to move the stage.
• homed : The stage is calibrated.

 

TVFOCDIA (DEIMOS2) rw int I11 %d (0.0 to 10.0)

TV autoguider focus diagnostics test selection.

 

TVFOCENC (DEIMOS2) r int I11 %d (0.0 to 10000.0)

TV autoguider focus second encoder raw position.

 

TVFOCERR (DEIMOS2) r int I11 (-1.0 to 0.0)

TV autoguider focus command error number. Is an instance of stage_err:

stage_err (map.helpers) r int I11 %s (-1.0 to 0.0)

Generic map meme for stage error number keywords. Valid values of stage_err are:

• No error : Last command succeeded.
• Error : Command failed (Generic error number).

 

TVFOCFIP (DEIMOS2) r varchar(68) A (0.0 to 1.0)

TV autoguider focus fiducial light sensor input. Is an instance of blocked_open:

blocked_open (map.helpers) r char(1) L1 %s (0.0 to 1.0)

Generic map meme for fiducial light sensor boolean state (BLOCKED/OPEN) keywords. Valid values of blocked_open are:

• blocked : No light detected at fiducial sensor
• open : Light detected at fiducial sensor

 

TVFOCFOP (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider focus light source control. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

TVFOCHLT (DEIMOS2) rw char(1) L1 %s (0.0 to 1.0)

TV autoguider focus halt software switch.

 

TVFOCLIM (DEIMOS2) r int I11 (0.0 to 63.0)

TV autoguider focus limit status. Is an instance of limit_mask:

limit_mask (map.helpers) r int I11 %d (0.0 to 7.0)

Generic map meme for stage limit bitmasked keywords. Valid values of limit_mask are:

• None : Not in any limit.
• FWD soft : Stage beyond forward software limit.
• FWD hard #1 : Stage beyond forward primary hardware limit. The stage can be commanded to move away from the limit.
• FWD hard #2 : Stage beyond forward secondary hardware limit. Power to stage cut off.
• REV soft : Stage beyond reverse software limit.
• REV hard #1 : Stage beyond reverse primary hardware limit. The stage can be commanded to move away from the limit.
• REV hard #2 : Stage beyond reverse secondary hardware limit. Power to stage cut off.

 

TVFOCMOD (DEIMOS2) rw int I11 (0.0 to 4.0)

TV autoguider focus control mode. Is an instance of stage_mod:

stage_mod (map.helpers) rw int I11 %d (0.0 to 4.0)

Generic map meme for stage mode keywords. Valid values of stage_mod are:

• Position : Positioning mode. This is the normal running mode. The stage can be calibrated or moved to a targert position.
• Jog : Jog mode. The stage will attemept to jog at the target velocity. The stage can be calibrated in this mode.
• Keyword : Keyword validation mode. No i/o occurs. A SUCCESS status message is returned immediately in response to each keyword request.
• Simulate : Simulation mode. No I/O occurs. A SUCCESS status message is returned for each keyword request after device I/O and control are simulated.
• Diagnostic : Diagnostic mode. Stage diagnostics can be run.

 

TVFOCMSG (DEIMOS2) r varchar(68) A %s

TV autoguider focus message.

 

TVFOCNAM (DEIMOS2) rw varchar(68) A

TV autoguider focus ordinal position name. Uses map TableLook to convert or format TVFOCORD:

• 0 Home
• 1 Nominal

TVFOCORD (DEIMOS2) rw int I11 (0.0 to 5.0)

TV autoguider focus ordinal position. Uses map TableLook to convert or format TVFOCRAW:

• 0 0
• 5000 1

TVFOCRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider focus raw position.

 

TVFOCSTA (DEIMOS2) r int I11 (0.0 to 6.0)

TV autoguider focus status. Is an instance of stage_status:

stage_status (map.helpers) r int I11 %d (0.0 to 6.0)

Generic map meme for stage status keywords. Valid values of stage_status are:

• Unknown : Unknown state. The stage isn't properly defined by its config data, but its name and id are known. This error state is very hard to achieve.
• Configured : The stage's configuration data has been loaded okay. The stage hasn't been calibrated yet. It is ready to be homed.
• Homing : The stage is in finding its home reference position for calibration purposes.
• Ready : The stage has been calibrated. It is ready to move.
• Moving : The stage is moving to a target position.
• Jogging : The stage is accelerating to, or jogging at, a target velocity.
• Diagnostics : A selected diagnostics routine is running.

 

TVFOCTRG (DEIMOS2) r int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider focus raw position target.

 

TVFOCVAL (DEIMOS2) rw real E13.6 [mm] (0.0 to 10.0)

TV autoguider focus position in millimeters. Uses map Linear to convert or format TVFOCRAW:

TVFOCRAW (DEIMOS2) rw int I11 %d [encoder counts] (0.0 to 10000.0)

TV autoguider focus raw position.

 

TVFOCVEL (DEIMOS2) rw real E13.6 %E [mm/s] (0.0 to 0.25)

TV autoguider focus velocity.

 

TVFOCVRB (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider focus verbose message flag. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

TVPOW (DEIMOS2) rw varchar(68) A (0.0 to 1.0)

TV autoguider AC power. Is an instance of off_on:

off_on (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (OFF/ON) keywords. Valid values of off_on are:

• off :
• on :

 

UPSC1LOW (DEIMOS2) r varchar(68) A (0.0 to 1.0)

CCD electronics UPS battery power low. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

UPSC1MON (DEIMOS2) r varchar(68) A (0.0 to 1.0)

CCD electronics UPS monitor. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

 

UPSM1LOW (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Motor electronics UPS battery power low. Is an instance of false_true:

false_true (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for boolean state (FALSE/TRUE) keywords. Valid values of false_true are:

• false :
• true :

 

UPSM1MON (DEIMOS2) r varchar(68) A (0.0 to 1.0)

Motor electronics UPS monitoring. Is an instance of manual_auto:

manual_auto (map.helpers) rw char(1) L1 %s (0.0 to 1.0)

Generic map meme for a control mode boolean state (MANUAL/AUTOMATIC) keywords. Valid values of manual_auto are:

• manual : System is in manual mode. Automated control suspended.
• auto : System is in automatic control mode.

1.2.3 Map Definitions

 

Identity (MapTypes) map map

A map meme which indicates that its meme has all the characteristics (min, max, legal values, ...) of another meme. In actuality this is probably an abuse of our current understanding of memes schema.

 

Linear (MapTypes) map map

A map which indicates that you should perform a linear conversion from the min and max of the first meme to the min and max of the second meme (ISA target). Example: mumbleVAL ISA mumbleRAW, map is Linear.

 

TableLook (MapTypes) map map

This map type indicates a simple table lookup using the Mmaps table